Dell Precision 7960 Tower - M.2 Solid-State Drive Module; Removing the M.2 Solid-State Drive Module

Steps
1. Place the hard drive into the external hard-drive caddy and align the tabs on the bracket with the slots on the hard drive.
2. Snap the hard-drive into the external hard-drive caddy.
Next steps
1. Install the external 3.5-inch hard-drive assembly.
2. Follow the procedure in After working inside your computer.
M.2 solid-state drive module
Removing the M.2 solid-state drive module
Prerequisites
1. Follow the procedure in Before working inside your computer.
About this task
The following images indicate the location of the M.2 solid-state drive module and provide a visual representation of the removal
procedure.
Removing and installing components
53