Left-side cover
Removing the left-side cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
NOTE: Ensure that you remove the security cable from the security-cable slot (if applicable).
About this task
The following images indicate the location of the left-side cover and provide a visual representation of the removal procedure.
Steps
1. Insert the side-cover key and turn the key counterclockwise to unlock the side cover.
2. Push the latch and release the left-side cover from the computer.
3. Open the side cover at an angle and lift the cover away from the chassis.
Installing the left-side cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the left-side cover and provide a visual representation of the installation procedure.
14
Removing and installing components
To Next Page
Loading...
