Dell Precision 7960 Tower - Front SATA Hard-Drive Modules; Removing the Front SATA Hard-Drive Modules

4. Follow the procedure in After working inside your computer.
Front SATA hard-drive modules
Removing the front SATA hard-drive modules
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the front 2.5-inch hard-drive assembly.
3. Remove the front 3.5-inch hard-drive assembly.
4. Remove the right-side cover.
About this task
The following images indicate the location of the front SATA hard-drive modules and provide a visual representation of the
removal procedure.
104 Removing and installing components