Steps
1. Slide and insert the 3.5-inch hard-drive assembly into the external flexbay slot.
2. Close the release latch to secure the 3.5-inch hard-drive assembly in place.
Next steps
1. Follow the procedure in After working inside your computer.
Removing the external 2.5-inch hard-drive caddy
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the external 2.5-inch hard-drive assembly.
About this task
The following images provide a visual representation of the external 2.5-inch hard-drive caddy removal procedure.
50
Removing and installing components
To Next Page
Loading...
