Steps
1. Slide the release latch inwards to release the slim optical-drive module from the slot on the chassis.
2. Slide and remove the slim optical-drive from the slot on the chassis.
3. Pry and slide the slim optical-drive latch from the optical-drive bezel.
4. Remove the slim optical-drive away from the slim optical-drive latch.
Installing the slim optical-drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images provide a visual representation of the slim optical-drive installation procedure.
60
Removing and installing components
To Next Page
Loading...
