Dell Precision 7960 Tower - Installing the Ultraspeed Quad Solid-State Drive

Steps
1. Push the PCIe latch to open the PCIe door.
2. Lift and remove the UltraSpeed Quad card away from the expansion-card slot.
3. Align and place the PCIe filler into the PCIe slot and close the PCIe latch.
Installing the UltraSpeed Quad solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image provides a visual representation of the UltraSpeed Quad solid-state drive installation procedure.
78
Removing and installing components