Item Function
Add to Device Monitor
Table
Used on the selected contacts to quickly add the device to the Monitor Table.
Proceed with the steps in the example below.
(1) Select Network 1, then right-click Network 1, and then click
Copy
.
(2) Select Network 2, right-click Network 2, and then click
Paste
. A copy of Network 1 is put above Network
2, and Network 2 becomes Network 3.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
