Delta AS Series User Manual


Change the module I/O state
This functionality is only available for digital IO modules, analog IO modules and temperature modules. Right-click the
module to see the context menu and click
Module State
and then you can see an IO state table shows up. For digital
IO modules, you can right-click to set the input/output channel to ON or OFF, when the PLC CPU and the module are
on the RUN state.

Force to ON
：
Force to set the channel state to ON

Force to OFF
：
Force to set the channel state to OFF

Release
：
Release the selected channel from the force

Release all
：
Release all channels from the force
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

Delta AS Series Specifications

General

Series	AS Series
Power Supply	24VDC
Cooling Method	Natural convection
Programming Language	Function Block Diagram (FBD)
Communication Interface	Ethernet, RS-232, RS-485
Output Voltage	24V DC
Output Current	2A
Operating Temperature	55°C
Storage Temperature	70°C
Protection Features	Overvoltage
Certifications	CE, UL