understand the problem.
(11) Memory card
The memory card has the following functions.
System backup: user program, CPU parameters, module table, and the device setting values
System recovery: user program, CPU parameters, module table, and device setting values
Parameter storage: device value
Log storage: system error log and system status log
(12) I/O module installation
The AS Series PLC supports slide-and-lock installation on I/O modules when the power is off. After
the PLC is powered off, you can remove the defective module and replace it with a new one without
removing other modules.
(13) Supporting on-line debugging mode
You can use the on-line debugging mode in the AS series CPU module after a single instruction step
completes, or after a breakpoint is specified, to find bugs in the program.
The CPU module must be running to enter the debugging mode. After enabling the on-line monitoring
function, click . The debugging screen varies from programming language to programming
language, but the same operation applies to these programming languages. For the AS series PLC,
structured text does not support debugging mode, and sequential function charts supports debugging
mode during the action and the transition.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
Need help?
General
