9.4.5.2 Delta Adapter
1. Refer to section 9.4.4 to add new devices and create connections for all the added devices.
2. Click Show Data Exchange to open the editing page for data exchange.
3. Set up the address for data exchange
Set up the register address for the Scanner. Make sure the register address is free for use. The following examples
use 3 different types of devices for demonstrations.
PLC Controller - AS200
Multiple data exchanges can be executed for one PLC controller at a time. One connection is for one data
exchange. You can edit the addresses and data lengths for data exchange. Unit: 2 bytes.
Servo drive – CMM-EIP02 (MS300)
1) Only one data exchange can be executed for one servo drive at a time. The data length is fixed and cannot
be edited.
2) Click “…” to see more servo drive settings.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
Need help?
General
