Provides an interface for an SD card   
VR0/VR1 
VR0: use the flag SM166 to activate the values in SR166 
VR1: use the flag SM167 to activate the values in SR167 
4 
Input/Output LED 
If there is an input signal, the input LED indicator is ON. 
If there is an output signal, the output LED indicator is ON. 
Provides an interface for a n Ethernet communication   
Provides an interface for RS-485 communication 
Provides an interface for an extension card 
9 
Connects the module and the wiring module 
  AS300N-A does not come with inputs/outputs; no MIL connector for it.   
14 
Removable terminal 
blocks 
For wiring the input and output;   
Note: Since AS300N-A does not come with inputs/outputs, no terminal 
 
  AS200 Series (AS218PX-A/AS218RX-A/AS218TX-A/AS228R-A/AS228T-A/AS228P-A) 
10
11 12
88
75
95.5
13
98.3
88
8
 9
1
2
4
3
5
7
6
 
Unit: mm 
 
1 
Indicates the power status of the CPU module 
Run LED indicator 
Operating status of the module 
ON: the module is running. 
OFF: the module is stopped.   
Blinking: the module is detecting an error. 
Error LED indicator 
Error status of the module 
ON: a serious error occurs in the module. 
OFF: the module is normal. 
Blinking: a minor error occurs in the module. 
BAT.LOW LED 
Indicates the battery status of the CPU module. 
(Enable/Disable this display in HWCONFIG in ISPSoft) 
COM1 LED 
COM2 LED 
CAN LED 
Indicates the communication status of the COM/CAN port. 
OFF: no communication over the COM/CAN port 
Blinking: communication over the COM/CAN port 
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com 
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com