6
Warning and Caution Labels on the Robot Controller
Warning and caution labels on the controller Contents
Warning label 1
(For maintenance of the controller)
Risk of electrical shock.
Never open the controller cover when the power is ON.
Never touch the inside of the controller for at least 3
minutes even after turning the power OFF and
disconnecting the power cable.
Warning label 2
(For controller power switch)
Risk of injury.
Be sure to perform lockout/tagout before starting
servicing.
Turning the power ON may move the arm, causing injuries
if a person is inside the safety fence.
Caution label
(For cooling fans)
Risk of injury.
Do not insert fingers, sticks or other foreign objects
through the openings.
Caution label
The controller is not designed to be dust-, splash-, or
explosion-proof. Before installation, be sure to read the
user's manual.
Do not put anything on the controller or apply any impact
or shock to it.
Caution label
When using an external power source, never apply the
voltage not specified. Doing so can result in a controller
failure.
Caution label
After turning the power switch OFF, do not turn it ON for at
least six seconds.
To Next Page
Loading...
