Chapter 21: Snapshots 193
To add a plug-in to multiple snapshots from the Plug-Ins page:
1 Create a multi-selection of snapshots on the Snapshots page
2 Go to the Plug-Ins page.
3 Click the Snapshots menu for the plug-in to be added and
choose Add This Plug-In To Selected Snapshots. The selected
plug-in is added to the currently targeted snapshot, as well as
all other snapshots within the multi-selection.
Snapshots within the multi-selection that already contained
the plug-in being added are unaffected and preserve any pre-
viously stored settings.
Removing a Plug-In from Snapshots
To remove a plug-in from snapshots from the Snapshots page:
1 Select an individual snapshot, or create a multi-selection of
snapshots in the Snapshots List.
2 Click the Snapshots Plug-Ins icon to show the Snapshots
Plug-Ins list.
3 Right-click a plug-in within the plug-in list of the currently
targeted snapshot and choose Remove This Plug-In From Se-
lected Snapshots.
To remove a plug-in from multiple snapshots from the Plug-Ins
page:
1 Create a multi-selection of snapshots on the Snapshots page
2 Go to the Plug-Ins page.
3 Click the Snapshot menu for the plug-in to be removed and
choose Remove This Plug-In From Selected Snapshots.
The selected plug-in is removed from the currently targeted
snapshot, as well as all other snapshots within the multi-selec-
tion. Only snapshots within the multi-selection that contain
the selected plug-in are affected.
Updating a Plug-In Across Multiple
Snapshots
To update a plug-in across snapshots from the Snapshots page:
1 Select an individual snapshot, or create a multi-selection of
snapshots on the Snapshots page.
2 Select a plug-in within the plug-in list of the currently tar-
geted snapshot.
3 Right-click and choose Update Plug-In In Selected Snapshots.
To update a plug-in across multiple snapshots from the Plug-Ins
page:
1 Create a multi-selection of snapshots on the Snapshots page
2 Go to the Plug-Ins page. All plug-ins that are associated with
any of the currently selected snapshots are identifiable by
their red Snapshot menu.
3 Click the Snapshots menu for the plug-in to be updated and
choose Update This Plug-In In Selected Snapshots.
The selected plug-in is updated within the currently targeted
snapshot, as well as all other snapshots within the multi-selec-
tion. Snapshots within the multi-selection that do not already
contain the plug-in being added are unaffected.
Editing Plug-Ins
The Snapshot page provides two ways to quickly navigate to a
plug-in in order to edit its routing assignment or parameters.
To edit a plug-in associated with a snapshot:
Double-click the item in the Snapshot Plug-Ins list. Or,
right-click a plug-in in the Snapshots Plug-Ins list and choose
Edit Plug-In.
Using the Snapshots pop-up menu in the plug-in rack (Plug-Ins page)
Snapshots plug-ins pop-up menu with multiple plug-ins selected in the
Snapshots page
To Next Page
Loading...
