DigiDesign VENUE Profile - Page 205

Chapter 21: Snapshots 195
Pan, Balance and Width Crossfade Reference
† Crossfade does not apply to Pan for channel Aux sends.
†† Crossfade does not apply to Pan for input sources within the Matrix or PQ mixer.
Pre Settings
Snapshots can be used to recall the preamplifier settings on in-
puts for all scoped Input Channels. You can set any of the fol-
lowing Pre parameters to be recalled by the Pre data type but-
ton: Gain, Pad and Phase/polarity, +48V (Phantom Power),
HPF corner frequency and in/out state.
To set the Pre parameters recalled by the Pre Data Type button:
1 Go to the Options page and click the Snapshot tab.
2 Under Pre, select the options you want to include. Selected
items will be affected when the Pre data type is included in the
scope of a snapshot.
Classifying Aux Sends
You can classify Aux Sends as monitor sends (“Mon”) or as ef-
fects sends (“FX”), which lets you scope each type separately
from the Snapshots page.
To classify Aux Sends for snapshot scope:
1 Go to the Options page and click the Snapshots tab.
2 For each Aux Send bus or bus pair, click the Aux Mon or
Aux FX buttons to classify it as a monitor send or effects send,
respectively.
Aux Pre/Post State
Select this option to include the pickoff point pre-fader or
post-fader state of each Aux Send in snapshots.
Pan, Balance and Width Crossfade Parameter Reference
Pan Balance Width
Inputs† Input
Channel
Mono
X
Stereo
XX
FX Return Stereo
XX
Output
Mas-
ters††
Aux Mono/Stereo-linked
PQ
X
Matrix Mono/Stereo-linked
Groups Mono
X
Stereo
XX
Variable Groups Mono/Stereo-linked
X
Setting Pre parameters
This option is only a means of organizing Aux Sends for
snapshot control, and does not directly affect Aux bus
operation.
Classifying Aux Sends