VENUE Profile Guide246
Installing the ECx Client Software
The ECx Ethernet Control Software installer CD-ROM con-
tains remote control applications for both Windows and Mac.
Installing the ECx Client in Windows
To install the ECx Control client application (“UltraVNC”) in
Windows:
1 Insert the ECx installer disc in the computer CD or DVD
drive.
2 Open the Windows Client folder.
3 Double-click the “UltraVNC-Viewer.exe” file.
4 Follow the on-screen installation instructions to complete
the installation.
Installing the ECx Client on Mac
To install the ECx Control client application (“Chicken of the
VNC”) on Mac:
1 Insert the ECx installer disc in the computer CD or DVD
drive.
2 Open the Mac OS X Client folder.
3 Double-click the “cotvnc-20b4.dmg” file.
4 In the window that opens, drag the “Chicken of the VNC”
icon to copy it to a location on your hard drive.
Uninstalling ECx Host Software
If you need to uninstall ECx software from your VENUE sys-
tem, you can do so from the system desktop.
To uninstall ECx host software from your VENUE system:
1 Do one of the following to put your system into Config
Mode:
• Press the Console Config switch on the console
– or –
• Double-click the Mode box in the bottom-right corner of
the screen.
2 Go to Options > System.
3 Hold the Control key and click Shut Down to go to the sys-
tem desktop.
4 Locate and double-click the ECx host software uninstall pro-
gram (C:\Program Files\D-Show Ethernet Control Software\
Uninstall.bat).
The ECx host software is uninstalled, and the D-Show soft-
ware automatically restarts.
Reinstalling ECx Host Software
If ECx is installed on your VENUE system, you will have to re-
install the ECx host software after performing a System Re-
store or an Update.
System Restore If you perform a complete System Restore, the
ECx host software must be reinstalled from its original in-
staller disc. See “Installing ECx Host Software” on page 245.
Update If you perform an Update, you must still reinstall the
ECx host software. You can reinstall without using the ECx in-
staller disc because an Update leaves the ECx installer on your
VENUE system’s hard drive. You can also reinstall using the
original installer disc.
To reinstall after an Update without using the ECx installer disc:
1 Remove any USB key disks from all USB ports, and make
sure no installer discs are in the CD-ROM drive.
2 Do one of the following to put your system into Config
Mode:
• Press the Console Config switch on the console.
– or –
• Double-click the Mode box in the bottom-right corner of
the screen.
3 Go to the Options > Systems page.
Click the Update button.
The ECx folder will remain on your VENUE system hard
drive after uninstalling,
To Next Page
Loading...
