OperationModel 2500 103
© 2015-2017 Distek, Inc. All Rights Reserved
5 Another dialog window prompts the operator to introduce the dosages while the stirring is
paused.
Introducing the dosages
If using the countdown timer in the dialog window, introduce the
dosages when the timer reaches between 5 to 8 seconds. This allows the
stirring to start automatically.
6 Testing starts. Elapsed Time and Sampling (All
)
windows are updated.
Test started
7 Once the test reaches 20 seconds before the first sampling interval, the sampling time will
be displayed in seconds, prompting the user to get ready to collect the samples manually.
Collect all samples at zero seconds, as shown in sampling time display at zero seconds.
This step will repeat if the method is programmed to have multiple sampling intervals.
To Next Page
Loading...
