OperationModel 2500 145
© 2015-2017 Distek, Inc. All Rights Reserved
Select
Ca libra te
to start the calibration of the TCS internal sensor. Notice that the "
Ref-
Ca l
" date is updated.
Change the probe parameter to "
Externa l
". Repeat step
t1
to start the calibration of the
TCS external sensor.
After calibration of TCS sensors is complete, select
Done
to exit the calibration screen;
otherwise, if equipped with wireless sensors, select
Sha ft Ca libra tion
to continue.
TCS Calibration
To Next Page
Loading...
