Troubleshooting Guide
SmartDate X40 BFSE Version 1.0 Feb 2011
141/286
File System Warnings
2200 Corrupt file
User accepts warning and SmartDate X40 deletes corrupted
file
2201
Corrupt
settings
Warning message to be cleared by operator action and settings
to be returned to default values
2202
Variable data
logging
stopped
The variable data log file is full and needs to be retrieved before
more data can be logged. Warning message to be cleared by
operator action
2203
Variable data
log file wrap
around
The end of the variable data log file was reached. Warning
message to be cleared by operator action
2204
Variable data
log file nearly
full
The variable data log file will be full soon. Warning message to
be cleared by operator action
2205
Calendar file
nearly
exhausted
Load a new calendar file or select a job that does not require a
calendar file. Warning message to be cleared by operator
action
2206
Remote Job
database
disconnected
The database that the currently selected job is stored in is no
longer available, only local jobs may be selected. Warning
message to be cleared by operator action
2207
File system is
nearly full
File system is nearly full. Cleared when files are deleted
2208
File system is
full
File system full, no space for any more files. Cleared when
enough space has been freed up in the system
2209
Firmware
upgraded -
settings lost
The firmware has been upgraded and the settings have been
returned to the factory default values. Warning message to be
cleared by operator action
2210
Firmware
upgrade failed
The attempted firmware upgrade failed
2211
New time/date
codes file
downloaded
Start and stop producing for these to take effect
2212
New
configuration
files
downloaded
Please switch the Controller off and on for these to take effect
To Next Page
Loading...
