Troubleshooting Guide
SmartDate X40 BFSE Version 1.0 Feb 2011
158/286
Manual Operation Of The Printhead Cylinder
Access to the Diagnostic Menu is via the Mono User Interface following key sequence:
Color User Interface Mono User Interface
• If the Printhead and prime cylinders are working correctly, the cylinder should
extend fully without any signs of resistance when energized
• When de-energized the cylinder should return to its home position without any
resistance or delay
• Should either cylinder be suspected of being faulty the complete Printhead module
should be replaced
Selec
Menu
Diagnostic
Printhead Manual
Control
Toggle Printhead In/Out
Engineering
Manual Control
Toggle Printhead In/Out
To Next Page
Loading...
