Troubleshooting Guide
SmartDate X40 BFSE Version 1.0 Feb 2011
159/286
Selec
Manual Test Print
• The Manual Test Print feature is available and can be used for verifying print image
content and certain types of fault diagnosis
• The Manual Test Print function can be performed in either producing or standby
modes
• It is only possible to test print the current selected job
• When performing a test print on a Continuous application, an encoder signal must
be present; otherwise, the Printer will report an ‘invalid Printer command warning’
and will fail to initiate the test print
The Manual Test Print Menu can be accessed in the following menu:
Color User Interface Mono User Interface
Home Page
Adjust Print
Test Print
Menu
Test Print of Current Job
To Next Page
Loading...
