Dräger Fabius Tiro - Page 138

Configuration
138 Instructions for use Fabius Tiro SW 3.n
Activating the acoustic confirmation
When the function Acoustic Confirmation is
switched on, a tone is sounded when pressing the
rotary knob.
1 Select Acoustic Confirmation (H) and
confirm.
2 Select On or Off and confirm.
The window is closed.
Changing the waveform display
1 Select Waveform Display (I) and confirm.
2 Select Normal or Filled curve display and
confirm.
The window is closed.
When the setting Normal is selected, the pressure
waveform (J) is not shown as a filled area, but as a
line.
Changing the screen brightness
*
1 Select Display Background (K) and confirm.
2 Select Light or Dark screen brightness and
confirm.
The window is closed.
2213722139
Standby Set-up
H
Standby Set-up
I
22141
* available only with optional color screen
22143
Standby Set-up
J
Standby Set-up
K