Instructions for use Fabius Tiro SW 3.n 199
Technical data
Device outlets
Serial interfaces COM 1 and COM 2
Only connect to devices that meet the require-
ments of IEC 60950-1 for ungrounded SELV
circuits and the requirements of IEC 60601-1
(as of the 2nd edition) for exposed secondary
circuits with maximum 24 Vdc nominal voltage.
Protocol Vitalink, MEDIBUS
Connector 9-pole Sub-D, galvanically isolated with 1.5 kV
against internal electronics, 0.5 kV against
housing
Baud rate 1200, 2400, 4800, 9600, 19200, 38400 baud
Data bits 7 or 8
Parity Uneven, even, none
Startbit 1
Stopbit 1 or 2
Pin assignment
Pin 1 n/c
Pin 2 TXD
Pin 3 RXD
Pin 4 n/c
Pin 5 GND
Pin 6 n/c
Pin 7 n/c
Pin 8 n/c
Pin 9 n/c