Dräger Fabius Tiro User Manual

Instructions for use Fabius Tiro SW 3.n 143
Configuration
If the connected anesthetic gas monitor detects
desflurane, Fabius reacts as follows:
– Des auto is displayed in the status bar (A).
– The softkey DesComp ON/OFF (B) is no
longer displayed.
If the communication to the anesthetic gas monitor
fails, Fabius reacts as follows:
– The automatic desflurane compensation is
switched off.
– The message Des auto in the status bar (A) is
no longer displayed.
– The softkey DesComp OFF (B) is displayed.
To switch the desflurane compensation back on:
 Press the DesComp OFF softkey (B).
The label of the softkey changes to DesComp ON.
Accessing the alarm logbook
1 Press the AccessAlarm Log softkey (A).
2 To scroll through the alarm logbook (D), turn
the rotary knob.
Clearing the alarm logbook
 Select Clear Alarm Log (C) and confirm.
Closing the alarm logbook
 Select the input arrow (B) and confirm.
The pressure waveform and softkeys are
displayed again.
22155
Volume Control
A
22161
Volume Control
B
C
D

Dräger Fabius Tiro Specifications

General

Brand	Dräger
Model	Fabius Tiro
Category	Medical Equipment
Language	English