Instructions for use Fabius Tiro SW 3.n 219
Password
Password
Configuration password for Fabius Tiro Software 3.n
Cut-out from the instructions for use of Fabius Tiro
Software 3.n
To prevent unauthorized alteration, the start
settings for Fabius Tiro are protected by the
following configuration password:
Information for the configuration
password
To prevent unauthorized alteration, the default
settings for Fabius Tiro are protected by a 4-digit
password. For information on the start settings,
see page 132.
The configuration password appears on this page
of the instructions for use. Cut out the area with the
password and keep in a place which is safe from
access by unauthorized persons.
Upon request, DrägerService can customize the
password or deactivate the password function.
8088
To Next Page
