Rho 1012/1030 F Software
Position: Media can be printed with encoder test images multiple times.
Using the Position selection list, you specify the image line on which the
respective encoder test image is to be printed by repeatedly loading the
medium . The software calculates the required advance automa tically.
Media Transport System You control the manual advance of the medium with this option.
Continuously: The medium is transported further until you press Stop Media.
Reverse: The medium is transported backward until you press Stop Media.
Eject: The medium is transported out of the printer.
Stop Media: The advance is stopped.
3.2 Cleaning functions
You set the purge parameters and initiate the purge cycle on the Purge tab.
Fig. 59 Purge tab
Purge Cycle Long: Start purge cycle with a duration of approx. 6 minutes.
Short: Start purge cycle with a duration of approx. 3 minutes.
Wipe Only:Startautomat
ic suction o f the print heads.
Colors Under Colors, you select the colors for which the print heads are to be rinsed.
3.3 Maintenance
The Schedules ta b pro vides an overview of all service activitie s described
in the "Service" chapter (→ Page 118 / Service).
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 1012/1030 , Issued 07/2013 101 / 147
To Next Page
Loading...
