Durst Rho 1012 - Laying a Medium through the XY Cutter

E Operation Rho 1012/1030
10.5 Laying a medium through the X Y Cutter
10.5.1 Bypass mode
Laying a medium over roller tracks
✔ The roller tracks are laid on
1
Lay the medium (1) over the roller tracks.
10.5.2 Cutting mode
Lay the medium through the cutting unit
1. Set selector switch to MAN.
2. Press the UP button.
 The cutting unit moves upward.
3. Open the cutting unit with the footswitch.
92 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13