Durst Rho 1012 - Bypass Mode

E Operation Rho 1012/1030
8.3 Bypass mode
In bypass mode the medium is solely moved on roller tracks over the XY
Cutter.
8.3.1 Preparing the XY Cutter for the bypass mod e
1
Lay on the roller tracks (1).
 The XY Cutter is prepared for the bypass mode.
64 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13