FSoftware Rho 1012/1030
To select an image crop, you can define how much is to be cut away from the
respective image border. You have the following options here:
Enter the desired number of pixels or select it with the arrow keys under
Image Crop in th e respective input fields Left, Right, Top and Bottom.
Select the cro p with th e sliders (1).
If you w ant to move a selected image crop while maintaining the height/width,
you can lock the height/width with the
button.
Crop to Board With the Crop to Board bu tton, you crop an image starting from the top-left
corner automatically and precisely to the size of the plate medium. The
requirement here is that the image is larger than the plate medium.
Image Scale You scale the image with the buttons under Image Scale.
5.1.3 Preparing a job and transferring it to the Printing Queue
Preparing a job
1. Press Printing Queue.
2. Select desired job in the navigation window.
3. Selec t desired sub-tab Basics, Print Options, Bo
rders/Alignmen t or
Size.
4. Modify desired parameters.
5. Press Save.
Transferring jobs to Printing Queue
✔ The job is prepared
1. Select job in the navigation windo
w.
2. Press Print.
The job appears in the Printing Queue.
5.2 Printing queue
The Printing Queue dialog window shows all the jobs which have been
transferred from the input queue for printing. You can change the order of jobs
in the queue, delete jobs from the queue and initiate the printing process here.
116 / 147 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13
To Next Page
Loading...
