FSoftware Rho 1012/1030
Fig. 66 Print Options sub-tab
Print Direction Bidirectional: The ink is applied in both directions when the print carriage
moves. This increases print speed.
Unidirection a l: The ink is only applied by the print carriage upon its outward
traversal.
If the spot color white or an opaque ink for a shiny s
urface was created as
its own channel during image processing, you can
control the processing
of the s pot color individually.
Lamps ON upon carriage return: Durst recommends this option if you have
selected Un id ire ctional.
4.5 Image border and alignment
You can define the following parameters, among others, on the
Borders/Alignment sub-tab:
Border distances
Alignment
Oversize
108 / 147 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13
To Next Page
Loading...
