Durst Rho 1012 - Docking the Registration Table

Rho 1012/1030 EOperation
5.2 Docking the registration table
High weight of the registration table!
Danger of crushing during docking
Only dock the r egistration tab le with two persons .
Do not reach into the area of the printer guide while pushing.
1. Set the key switch at the printer to 2 (device-change position).
Fig. 25 Docking the registration table
2. Slide the registration table into the guide of the printer.
3. C l ose clamping lock.
4. C onnect t he power and control cables.
5. Connect the compressed-air hose.
6. Set the key switch at the printer to 1 (normal mode).
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 1012/10 30 , Issued 07/2013 49 / 147