FSoftware Rho 1012/1030
4 Managing media channels
You create new media channels and edit or delete existing media channels
on the tab under the Media button.
1 Navigation window
Fig. 63 Tabs under the Media button.
All created media channels are listed in the navigation window (1). You
specify the sorting order with the Type, Width and Name buttons.
With the Show All button, you can cause on
ly those media channels which
belong to a certain media family to be li
sted. This will give you a better
overview sho uld you have a la rge numbe
rofmedia.
4.1 Buttons on the right edge of the dialog window
Load/Unl oad The loading and unloading procedures for changing the media channel are
triggered with the Load and Unload buttons.
New A new media channel is created with the New button.
Copy
You copy the selected media channel and save it with a new name with the
the Copy button.
Edit
Parameters of the selected media channel are modified with the Edit button.
Delete The selected media channel is deleted with the Delete button.
4.2 Medium type
You can de fine the following parameters on the Type sub-tab:
104 / 147 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13
To Next Page
Loading...
