Durst Rho 1012 - Ambient Conditions; Modifications, Attachments and Changes in Location; Connection of External Devices

B Safety Rho 1012/1030
Safety sign
Meaning
Warning on chemical substances
Dispose of the device via a separate collection for electric and
electronic devices in accordance with the locally applicable
regulations
High voltage text sign
Caution: high voltage
The mains connection m ust be disconnected before opening
the device and when changing tubes
Ultraviolet rad iation text sign
Caution: ultraviolet radiation
UV-C, UV-B, UV-A;
Protect your eyes and skin
4 Ambient conditions
The printer may only be operated under the specified ambient conditions
(→ Page 143 / Technical data).
5 Modifications, attachments and change
sin
location
The printer is installed and commissioned by authorized Durst service
technicians.
 The installation location of the printer may not be changed. Structural
stresses and strains are taken into account during installation. Any
change to the installation location or structural modifications to the
building must be approved by D urst Phototec hnik AG.
 Opening the printer h
ousing, electronics case and housing covers, except
for routin e work, an
d opening the workstation or unplugging the cable
may only be perform
ed by authorized Durst service technicians.
 Print heads may only be replaced by authorized Durst service technicians.
 TheUVlampprotectionpreventsreflected light from drying out the ink in
the print head, thus damaging it. The UV lamp protection may therefore
not be removed.
6 Connecti
on of external devices
The printer features SELV connections in accordance with IEC60950. The
computer features two Fast Ethernet connections (SELV) for connection to
LAN/WAN networks. Only SELV-compatible peripheral devices approved by
Durst m a y be connected to the printer.
14 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13