Rho 1012/1030 B Safety
14.3 Careful handling of the encoder ruler
Fig. 4 Encoder ruler
Scratching the encoder ruler (1) reduces the functional
ity of th e printer.
Do not touch the encoder ruler with hard objects.
14.4 Media
Unsuitable me dia c an cause a collision with the print carriage.
Examples:
Bent sheet metal
Mediawithunevensurfaces
Mediawithinsufficient temperat
ure sta bility
Media with ribs or ridges
Do not loa d media wh ich could caus e a collision.
14.5 Purge
Incorrect cleaning of the slots on the nozzle plate can cause print heads
to dry out. This will lead to decreased printing quality or even the failure of
individual nozzles.
Due to soiling on th
e nozzle plate, the ink can be smeared on the printed
medium.
Soiled filters and soilin g o n th e conveyor belt ca n le ad t o malfunctioning of
the exhaust and ventilation. This can cause the following damage:
Failure of el
ectronic components
Overheating of the UV lamps
Damage to the conveyor belt via overheating
Soiling o
n the rubber rollers and on the encoder ruler reduce print quality.
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 1012/10 30 , Issued 07/2013 21 / 147
To Next Page
Loading...
