Durst Rho 1012 - Stacking Unit; Operating Elements

E Operation Rho 1012/1030
9 Stacking unit
9.1 Operating elements
1 Operator panel
1
Fig. 33 Operator panel
Operation is carried out at the operator panel (1). Two operating modes can
be selected:
 Automatic mode for serial printing
 Manual mode for printing individual plate media
In automatic mode the plate media are stacked on each other. The light
barrier detects the height of the stack and automatically adjusts the vertical
position of the table.
66 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13