Durst Rho 1012 - Adjusting the Cutting Unit (Longitudinal Cut)

Rho 1012/1030 EOperation
8.4 Adjusting the cutting unit (longitudinal cut)
8.4.1 M oving the cutting unit horizontally
2
1
1. Loosen the fixing sc rew (2).
2. Slide the cutting unit (1) to the desired position.
3. Tighten the fixing screw.
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 1012/10 30 , Issued 07/2013 65 / 147