Rho 1012/1030 F Software
2.4 Media families
As you must create separate media channels for the different medium
thicknesses and blanks for each material, the number of media channels
can become unclear very quickly. For this reason, you have the option
of co mbining multiple media channe ls into a media family, e.g. KAPA or
corrugated cardboard. Each media family is clearly identified by an ID number
(Fami ly ID). If a job is transferred from the RIP server to the corre sponding
input queue of the printer, it provides its ID number right away, thus indicating
the media family to which it belongs. If you select the media channel for a job
in the input queue, the software only offers you those media channels that are
part of the media family of the job for pre-selection.
On the Media Family tab , you can create new media families an d e dit and
delete existing m e dia families.
1 Navigation window
Fig. 57 Media Family tab
Navigation window
All created media channels are listed in the navigation window (1). You
specify the sorting order with the ID and Name buttons.
2.4.1 Buttons on the rig
ht edge of the dialog windo w
New
A new media family is created with the New button.
Copy Yo u copy the selected media family and save it with a new name with the
the Copy button.
Edit
Parameters of th e selec ted media family are modified with the Edit button.
Delete
The selected media family is deleted with the Delete button.
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 1012/10 30 , Issued 07/2013 99 / 147
To Next Page
Loading...
