G Service Rho 1012/1030
3. Press the Long button under Purge Cycle.
The print carriage moves over the catch tank.
The purge cycle is started.
All the print heads are first purged and then cleaned by the suction
strip row by row.
The ink is collected in the catc h tank.
After purging has been completed, the print carriage moves into the
park position.
12.6 Wiping print heads
12.6.1 Wiping print heads wet
✔ The long purge cycle has been carried out.
Contact with in k !
Health hazard
Wear protective gloves.
Wear safety goggles.
Avoid allowing ink to come into contact with skin and eyes.
Cleaning with unsuitable cleaning tools!
Damage to the print heads
Clean print heads with the specified cleaning cloths and cleaning
solution only.
1. Prepare cleaning access point for print head m aintenance
(→ Page 131 / Opening/closing cleaning access point).
2. Pour cleaning solution into dispenser bottle.
134 / 147 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13
To Next Page
Loading...
