Durst Rho 1012 - Page 135

Rho 1012/1030 G Service
Fig. 91 Saturating cleaning cloth with cleaning solution
3. Saturate cleaning cloth with cleaning solution.
Fig. 92 Wiping print head
4. Depending on the requirements, wipe the YM and MY print heads or
all the print heads wet along the s lot once from back to front until all
remaining color residues or coatings have been removed. The print head
surface must be bare.
5. Prepare cleaning access point for printing.
6. Print to sta bilize the n ozzles.
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 1012/1030 , Issued 07/2013 135 / 147