E Operation Rho 1012/1030
2.2.2 Shutting down worksta tion
Only the software should be exited daily, without shutting down the
workstation. The monitor switches off automatically.
We recommend only shutting down the workstation if the unit will not
be used for more than two days.
✔ The software has been exited
Shut down Linux operating system.
Once the Linux operating system has shut down, the workstation
switches off automatically.
2.2.3 Connecting a USB stick/an external USB hard disk
Data transfer from an external USB hard disk, for example, only makes
sense via the connected RIP server since the image data to be printed
must be in th e 1-b it forma t.
Connection of an incompatible device to the workstation!
Damage to the workstation
Connect only SELV-compatible devices to the workstation.
Connect a USB stick/USB hard disk to the USB port of the computer.
3 Automatic feed table
3.1 Operating modes
The automatic feed table can be operated in 3 operating modes:
Automatic mode for serial printing
Semi-automatic mode for pr
inting individual plate media
Manual mode for individual plate m edia with excess length
36 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13
To Next Page
Loading...
