Durst Rho 1012 - Operating the Automatic Feed Table

E Operation Rho 1012/1030
Button designation Function
Right side: Ready–Right
Left side: Ready – Left
Starting drawing-in of the plate medium
Right side: Stop – Right
Left side: Stop – Left
Stopping drawing-in of the plate medium
Selector sw itch Auto –
Man/Ext
Switch between semi-automatic and
automat ic m ode
Manual mode
The rolls (1) can be travelled up and down with the Roll Up – Down buttons
(2).
3.3 Operating the automatic feed table
3.3.1 Docking the automatic feed table
High weight of th e feed tab le !
Danger of crushing during docking
Only dock the feed table with two persons.
Do not reach into the area of the printer guide while pushing.
1. Set the key switch at the printer to 2 (device-change position).
38 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13