Rho 1012/1030 F Software
4.6.2 Editing existing media channel
1. Press Media.
2. Select desired media channel in the navigation window.
3. Select desired tab or sub-tab.
4. Press Edit.
5. Edit desired parameters.
6. Press Save.
4.6.3 Deleting media channel
1. Press Media.
2. Select desired media channel in the navigation window.
3. Press Delete.
4.6.4 L oading/unloading media channel
✔ The m edia channel is created
1. Press Media.
2. Select desired media channel in the navigation window.
3. Press Load/Unload.
5Printing
Once the job has been prepared on the RIP server and transferred to the
workstation of the printer, p r inting occurs in the following steps:
Prepare job in the input queue (→ Page 113 / Input queue)
Tran sfer job to the printing queue (→ Page 113 / Input queue).
Initiate printing process in the printing queue (→ Page 116 / Printing
queue).
5.1 Input queue
You prepare jobs for printing in the input queue under the Input Queue
button. As soon as a job is transferred from the RIP server to the workstation,
it appears in one of the corresponding input queues.
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 1012/1030 , Issued 07/2013 113 / 147
To Next Page
Loading...
