Durst Rho 1012 - Loading the Plate Medium with the Registration Table

E Operation Rho 1012/1030
10.2 Loading the plate medium with the registration
table
10.2.1 Procedure
✔ In the software Manual Continuous Feeding is activated in the media
channel
✔ The registration table is set
1. Load the desired media channel in the software.
2. Push the plate medium until the stops of the registration table.
3. Start the plate drawing-in with the footswitch.
–or–
Start the plate drawing-in with the START button.
 The plate medium is drawn in automatically.
74 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13