G Service Rho 1012/1030
7Changingfilter of the ink separator
Fig. 79 Changing filters of the ink separators
Energized components!
Risk of death via electric shock
Switch off printer with the main switc h.
Securethemainswitchwithalock.
Contact with in k !
Health hazard
Wear protective gloves.
Wear safety goggles.
Avoid allowing ink to come into contact with skin and eyes.
1. Remove hoses (5).
2. Unscrew the ink separator completely and remove it.
3. Loosen all the screws (1) at the top part (2).
4. Remove the filter (3).
5. Place the new filter into the bottom part (4) so that the yellow side faces
up.
124 / 147 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13
To Next Page
Loading...
