Durst Rho 1012 - Setting the Suction Power

E Operation Rho 1012/1030
1
9. Set the guide plates (1) to the desired position.
10. Switch on the conveyor belt for waste.
11. Press the DOWN button.
 The cutting unit moves downward.
12. Set the selector switch to AU TO.
11 Setting the suction power
The suction power can be set with the controller (1).
1Controller
Fig. 51 Controller for setting the suction power
94 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13