FSoftware Rho 1012/1030
4.5.3 Horizontal Image Oversize/Vertical Im age Oversize
To ensure th at the medium is print ed up to the edge, you ca n enter an
oversize for overprinting under Horizontal Image Oversize and Vertical
Image Oversize. The software then clones the pixels at the image border and
inserts them at the border according to the oversize. Here, printing occurs in
the image border, image spacing or medium border by the oversize value.
1Oversize
2 Medium border
3 Image
4 Image spacing
Fig. 70 Overprinting with images with borders (schemati
cexample)
4.6 Creating, editing and deleting media channels
4.6.1 Creating new media channel
1. Press Media.
2. To create a media channel with completely new data, carry out the
following steps:
–PressNew.
– Select Media Definition tab.
– Select Type sub-tab.
– Enter a name in the Media Name input field.
–PressSelect.
– Select media family.
– Edit other media parameters.
3. To create a new media channel based on an existing media channel,
carry out the following steps:
– Select desired existing media channel in the navigation window.
–PressCopy.
– Modify desired parameters.
– Rename media channel if necessary.
– Edit other media parameters.
4. Press Save.
112 / 147 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13
To Next Page
Loading...
