Durst Rho 1012 - The Status Bar; Basic Operation; Setting up Printer; Switching-On Time

FSoftware Rho 1012/1030
1.3 The status bar
The status bar info rms you of the important current data of the printer, e.g.
loaded medium, medium width, remaining length and ink fill level.
Fig. 53 Status bar
1.4 Basic operation
You can operate all dialog elements, e.g. buttons, scroll bars and arrow
symbols, just by pressing the touch screen.
You can also use the keyboard, trackball and mouse.
1.4.1 Starting the software
✔ Monitor and computer are switched on
✔ The Linux operating system has been started
Double-press .
1.4.2 Exiting the software
1. Press .
 The Durst Rho dialog window appears.
2. Con fi rm with Yes.
1.4.3 Modifying parameters
To change the parameters on the tabs, the general procedure is as follows:
1. Press Edit.
2. Modify desired parameters.
3. Press Save.
2 Setting up prin
ter
2.1 Switching-on time
Define the following settings on the Auto Timer tab:
96 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13