Durst Rho 1012 - Heavy Roll Tool 60 (Optional)

C Description Rho 1012/1030
1.2 Heavy roll tool 60 (optional)
Task Heavy roll media with a diameter between 0.3 m and 0.6 m can be loaded
with the Heavy Roll Tool 60.
Components The Heavy Roll Tool 60 is comprised of an unwinding unit on the loading
side and a winding unit on the unloading side. The winding and unwinding
units have essentially the same design
1 Roll mount
2Rollmedium
Fig. 7 Components of the heavy roll tool 60 (here: unwinding unit on
the loading side)
Function
The core of the roll medium (2) rests on an axis that is borne in the roll mounts
(1) of the unwinding unit or winding unit. Locking jaws on the axis are pressed
against the core using compressed air. This secures the c ore on the axis.
The roll medium is lead through the printer over the redirection and dancing
rollers and wound on the winding unit on the unloading side.
26 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13