Rho 1012/1030 C Description
1.3 Stacking unit (optional)
Task The stacking unit stacks printed plate media automatically.
Components
1 Limiting plates
2 Straight im p acter
3 Compressed-air nozzles
1
2 3
Fig. 8 Stacking unit
Function
Compressed-air nozzles (3) generate an air cushion on which the printed
plate media slide into the stacking unit. The straight impacter (2) moves to
and fro on the axis and automatically pushes the stack flushtothesidewall
of the stacking unit. The limiting plates (1) are set to the length of the plate
media and limit the stack to the rear.
A light barrier detects the height of the plate stack and automatically adjusts
the vertical position of the table.
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 1012/10 30 , Issued 07/2013 27 / 147
To Next Page
Loading...
