Durst Rho 1012 - Page 93

Rho 1012/1030 EOperation
1
4
3
2
4. Lay the medium (3) over the redirection rollers (2) under the yellow belt
(1) through the cutting unit.
5. Align a mediu m.
6. Close the cutting unit with the footswitch.
7. Lay on the tensioning roller (4) and lower with the line onto the medium.
8. Set the knife to the desired position (→ Page 65 / Adjusting the cutting
unit (longitudinal cut)).
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 1012/10 30 , Issued 07/2013 93 / 147