Durst Rho 1012 - Page 39

Rho 1012/1030 EOperation
Fig. 16 Docking the automatic feed table
2. Slide the feed table into the guide of the printer.
3. C l ose clamping lock.
4. Connect the power cable and com
pressed-air hose to the external supply.
Fig. 17 Connecting the control cables
5. Connect the control cable of the feed table with the control cable of the
printer.
6. Set the key switch at the printer to 1 (normal mode).
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 1012/10 30 , Issued 07/2013 39 / 147